#define stepPin 4
 #define dirPin 2
 #define outputA A0
 #define outputB A5
 int counter = 0;
 int angle = 0; 
 int aState;
 int aLastState;  
 
void setup() {
  // Sets the two pins as Outputs
  pinMode(stepPin,OUTPUT); 
  pinMode(dirPin,OUTPUT);
  pinMode (outputA,INPUT);
  pinMode (outputB,INPUT);
  
  aLastState = digitalRead(outputA);

}
void loop() {
  aState = digitalRead(outputA);
  
  if (aState != aLastState){     
     if (digitalRead(outputB) != aState) { 
       counter ++;
       angle ++;
       rotateCW();  
     }
     else {
       counter--;
       angle --;
       rotateCCW(); 
     }
     if (counter >=30 ) {
      counter =0;
     }

     
   }
  aLastState = aState;
}
void rotateCW() {
  digitalWrite(dirPin,LOW);
    digitalWrite(stepPin,HIGH);
    delayMicroseconds(2000);
    digitalWrite(stepPin,LOW);
    delayMicroseconds(2000); 
}
void rotateCCW() {
  digitalWrite(dirPin,HIGH);
    digitalWrite(stepPin,HIGH);
    delayMicroseconds(2000);
    digitalWrite(stepPin,LOW);
    delayMicroseconds(2000);   
}